BITUMEN 35/50
![BITUMEN-35-50](https://sebco.co/wp-content/uploads/2024/05/BITUMEN-35-50.png)
Product Specifications:
Test title | Explanations | Standard Range | Test Method |
Min Max | |||
PenetrationA | at 25°C (100 g, 5 sec) mm/10 | 35 50 | EN 1426 |
Softening Point | °C | 50 58 | EN 1427 |
Flash Point | (Cleveland Open Cup),°C | 240 ** | EN ISO 2592 |
Solubility | in trichloroethylene , % | 99 ** | EN 12592 |
Kinematic Viscosity | at 135°c , mm2/s | 370 ** | EN 12595 |
Resistance to Hardening at 163°C | |||
Retained Penetration | % | 53 ** | EN 12607-1 |
Increase in Softening Point | °C | ** 8 | EN 12607-1 |
Change of Mass | % | ** 0.5 | EN 12607-1 |
Available Packaging Options:
![](https://sebco.co/wp-content/uploads/2024/04/steel-drums.jpg)
STEEL DRUM
![bulk-bitumen](https://sebco.co/wp-content/uploads/2024/05/bulk-bitumen.png)
BULK
![jambo-bag](https://sebco.co/wp-content/uploads/2024/04/jambo-bag.jpg)
JUMBO BAG
![bitutaner](https://sebco.co/wp-content/uploads/2024/04/bitutaner.jpg)
FLEXITANK
Bitumen 35/50
Key features of Bitumen 35/50:
1. Softening point: Its softening point is between 49 and 56 degrees Celsius. This means that this bitumen hardens at temperatures below 49°C and softens at temperatures above 56°C.
2. Boiling point: The boiling point of 35/50 bitumen is between 220 and 260 degrees Celsius.
3. Adhesion: The adhesion of this type is good. This means that this bitumen can adhere well to other surfaces.
4. Permeability: Its permeability is relatively low, which means that this bitumen is resistant to water penetration.
5. Dynamic softening temperature: Its dynamic softening temperature is between 35 and 45 degrees Celsius.
6. Dynamic friction coefficient: its dynamic friction coefficient is between 0.4 and 0.6.